Truck and Trailer Collision Repair Services

Structural frame straightening, dent repair, and factory-matched refinishing for commercial trucks, trailers, and fleet vehicles, all under one roof.

Get Damaged Equipment Back on the Road Safely

Impact damage, frame misalignment, and deep panel creases affect more than appearance. Left unrepaired, they cause tracking problems, uneven tire wear, and failed safety inspections that keep your trucks parked.
At Dependable Paint, we provide complete truck and trailer collision repair for heavy trucks, trailers, and service vehicles. Our truck collision repair team handles structural straightening, body work, and refinishing in one facility, returning your equipment to OEM specifications.
As a full-service fleet repair & collision centre, we manage the entire repair from assessment to final paint. Your truck doesn’t move between shops, and you deal with one team from start to finish.

Services we offer

Collision and Body Repair Services for Heavy Equipment

Frame Straightening & Chassis Alignment

Using high-capacity hydraulic towers and computerized systems, our technicians pull bent frames and crossmembers back to factory alignment, restoring structural strength and proper road tracking.

Truck Dent Repair & Panel Repair

Our truck dent repair team reshapes heavy-gauge steel and aluminum using stud welders and dollies. For severe damage, our truck panel repair replaces damaged sections seamlessly.

Truck Bed & Bed Rail Dent Repair

Heavy cargo and loaders damage dump beds and flatbeds. Our truck bed rail dent repair straightens bent floors, sidewalls, and rails so tailgates close and seal properly.

Composite & Fibreglass Hood Reconstruction

We rebuild cracked or broken fibreglass hoods, fairings, and roof deflectors using structural resins and matting, fully restoring their original strength, contour, and aerodynamic profile.

Trailer Wall & Roof Sheet Replacement

We replace torn aluminum panels and bent posts caused by side impacts or low-clearance strikes, re-fastening them to factory standards to keep trailers completely weathertight and secure.

Commercial Truck Body Repair

Beyond collisions, our commercial truck body repair covers rusted cab corners, damaged steps, bumpers, and fenders. We fix wear and tear before it turns into a larger structural problem.

Signs Your Truck or Trailer Needs Collision Repair

Some collision damage isn’t visible right away. Book an assessment if you notice:

Pulling or crabbing on the highway, even after an alignment
Uneven or fast tire wear from axles knocked out of square
Doors, hoods, or tailgates that won't close or seal
Trailer leaks after a dock strike or low-clearance hit
Cracks in fibreglass hoods or fairings near mounting points
Air or electrical faults after an impact
A failed safety inspection due to frame or body damage

Catching damage early keeps repairs smaller and gets your truck back on the road faster.

Vehicles we serve

Vehicles We Repair

Our oversized spray booths and advanced painting facilities are fully engineered to handle every type of commercial vehicle and heavy-duty asset:

Transport Trucks

Long-haul & sleeper cabs

Dump Trucks

Gravel boxes & bodies

Flatbed Trucks

Decks & utility beds

Utility Trucks

Service & municipal

Logging Trucks

Booms & heavy haul

Mobile Service Trucks

Field & response units

Transport Trucks

Long-haul & sleeper cabs

Dump Trucks

Gravel boxes & bodies

Flatbed Trucks

Decks & utility beds

Utility Trucks

Service & municipal

Logging Trucks

Booms & heavy haul

Mobile Service Trucks

Field & response units

Tanker Trucks

FUEL, WATER & BULK TANKS

Vacuum Trucks

SUCTION & RECOVERY UNITS

Cement Trucks

DRY BULK CEMENT CARRIERS

Concrete Pump Trucks

BOOM PUMP PLACEMENT RIGS

Asphalt Trucks

HOT MIX HAULING BODIES

Fire Trucks

PUMPERS, LADDERS & RESCUES

Garbage Trucks

COLLECTION & COMPACTOR BODIES

Snow Plows

PLOW, SALT & WINTER UNITS

School Buses

FLEET TRANSPORT BUSES

Bobcats

COMPACT SKID STEER LOADERS

Excavators

TRACKED DIGGING EQUIPMENT

Bulldozers

DOZER BLADES & CRAWLERS

Wheel Loaders

BUCKET LOADING MACHINES

Graders

ROAD GRADING MACHINES

Cranes

LIFTING & BOOM EQUIPMENT

Forklifts

WAREHOUSE & YARD HANDLING

Agricultural Equipment

FARM MACHINERY & IMPLEMENTS

Not sure if we can take your vehicle? Contact us with the details and we’ll confirm.

Engineered for Durability

Our Truck and Trailer Collision Repair Process

Damage Assessment & Documentation

We inspect the truck, photograph all damage, and prepare an itemized estimate. This documentation can also support your insurance claim.

System Inspection

Before any pulling or welding, we check air brake lines and electrical harnesses for hidden damage. Pinched or damaged lines are replaced with OEM-spec parts.

Frame Measuring & Straightening

Computerized measuring compares your frame to factory dimensions. Our technicians then cold-pull the frame with hydraulic rams, avoiding heat that can weaken heat-treated frame steel.

Body, Dent & Panel Repair

We straighten dents, rebuild composite parts, and replace panels that can’t be saved.

Colour Match & Refinish

Digital colour matching recreates your fleet colour. We apply commercial-grade polyurethane coatings and cure them with controlled heat, so the repaired area blends with the rest of the truck.

Final Measurement & Quality Check

We re-measure the frame, inspect the finish, and confirm the truck is ready to return to service.

Collision Repair Close to Where Accidents Happen

Our Dartmouth shop offers heavy truck dent removal in Dartmouth, NS, along with commercial truck collision repair in Halifax for fleets dealing with port traffic and icy winter roads. For New Brunswick operators, we provide fleet vehicle collision repair in Moncton, with frame, body, paint, and graphics work handled in one facility.
If you’ve been searching for “truck collision repair near me” or a “semi truck body repair shop near me” after an accident, contact us for a damage assessment. We coordinate intake around your routes and insurance timelines, so your truck spends as little time off the road as possible.

SPECIALIZED VS. GENERAL REPAIR

Why Fleets Trust Us with Surface Preparation

Feature	Dependable Paint (Specialized Shop)	General Auto Body Shop
Frame Repair	✓ High-capacity hydraulic towers and computerized measuring for heavy frames.	✗ Equipment sized for cars and light trucks only.
Straightening Method	✓ Cold-pulling that protects heat-treated frame steel.	✗ Heat applied to bends, which can weaken the frame.
Trailer Repairs	✓ Wall, roof, and post replacement for dry vans and reefers.	✗ Limited or no trailer repair capability.
Paint Matching	✓ Digital colour matching for steel, aluminum, and composite panels.	✗ Manual blending that can leave visible colour differences.
One-Shop Workflow	✓ Repair, paint, and graphics completed in one facility.	✗ Trucks sent to separate paint and graphics vendors.
Insurance Support	✓ Itemized estimates and damage photos for your claim.	✗ Basic estimates with limited documentation.

FAQs

Truck Collision Repair FAQs

Everything you need to know about timelines, warranties, and getting your fleet refinished.

How do you confirm a repaired frame is structurally sound?

We cold-pull frames with hydraulic rams to avoid heat damage, then re-measure against factory dimensions. We also inspect high-stress areas for cracks before the truck returns to service.

How much does truck bed dent repair cost?

Truck bed dent repair cost depends on the size and depth of the dents, whether the bed rails or floor are damaged, and how much refinishing is needed. We provide an itemized estimate after inspecting the bed.

Can you match fleet colours on a replaced composite hood?

Yes. Composite and fibreglass reflect light differently than steel. We adjust the paint formula for the material, so the new hood matches the colour and gloss of the surrounding panels.

Do you check for hidden air lines and wiring damage?

Yes. Before straightening or welding, we inspect air brake lines and wiring harnesses. Any damaged lines are replaced with OEM-spec parts.

Can you help with the insurance claim?

Yes. We provide itemized estimates, damage photos, and repair details that insurers typically request. This helps speed up approval and reduces paperwork for your team.

Do you repair trailers as well as trucks?

Yes. We repair trailer frames, walls, roofs, posts, and doors on dry vans, reefers, and flatbeds.

How long does truck dent repair take?

It depends on the damage and parts availability. A typical cab dent and panel repair with refinishing takes about three to five business days. We confirm your timeline after inspection.